Aerohive HiveAP 120 Access Point Network Router - [AuStock]

Description: The Aerohive Networks HiveAP 120 is a high-performance; 802.11n; 2×2 MIMO access point with a 10/100/1000 Ethernet port that delivers a data rate of 600Mbps with dual radios. The HiveAP 120 is cost-effective; enterprise-grade solution – ideal for education; health care; and distributed enterprise environments. With two radios and the ability to provide service concurrently on both 2.4GHz and 5GHz bands; the HiveAP 120 provides top performance at a low price point. The HiveAP 120 provides both mesh and access for 802.11a; b; g and n clients; with Aerohive’s unique and resilient cooperative control architecture. Specifications: Radio Specifications - 802.11a 5.150 - 5.850 GHz Operating Frequency Orthogonal Frequency Division Multiplexing (OFDM) Modulation 24 dBm Transmit Power Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback Radio Specifications - 802.11b 2.4 - 2.5 GHz Operating Frequency Direct-Sequence Spread-Spectrum (DSSS) Modulation 20 dBm Transmit Power Rates (Mbps): 11, 5.5, 2, 1 w/ auto fallback Radio Specifications - 802.11g 2.4 - 2.5 GHz Operating Frequency Orthogonal Frequency Division Multiplexing (OFDM) Modulation 22 dBm (100 mW) Transmit Power Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback A-MPDU and A-MSDU Frame Aggregation Radio Specifications - 802.11n 2.4 - 2.5 GHz & 5.150 - 5.950 GHz Operating Frequency 802.11n Modulation 24 dBm Transmit Power Rates (Mbps): MCS0 - MCS15 (6.5Mbps - 300Mbps) 2x2 Multiple-In, Multiple-Out (MIMO) Radio HT20 and HT40 High-Throughput (HT) Support A-MPDU and A-MSDU Frame Aggregation Receive Sensitivity - At Highest DataRate 802.11b: -87 dBm 802.11g: -76 dBm 802.11n (2.4) @ 20 MHz: -73 dBm 802.11n (2.4) @ 40 MHz: -71 dBm 802.11a: -75 dBm 802.11n (5) @ 20 MHz: -73 dBm 802.11n (5) @ 40 MHz: -70 dBm Antennas 2 x Integrated single band, 2.4-2.5 GHz Omni-directional, 4.0 dBi gain 2 x Integrated single band, 5.1-5.8 GHz Omni-directional, 2.0 dBi gain Interfaces Autosensing 10/100/1000 Base-T Ethernet Port Power over Ethernet (PoE) capable (802.3af) Ethernet Port 1x Reset Pinhole Power Options 802.3af Power over Ethernet (PoE) port 48v DC external power adapter (sold separately) Power Specification AC/DC power adapter: Input: 100–240 VAC Output: 48 V/0.625 A PoE nominal input voltages: 48 V, 0.35A (802.3af) Typical power consumption: 8W RJ-45 power input pins: Wires 4, 5, 7, 8 or 1, 2, 3, 6 NOTE: This item is pre-owned. Might have few minor scratches. Perfect working. The power adapter is NOT included.